EasyManua.ls Logo

Juniper ACX5048 - Chassis Lifting Guidelines for an ACX5000 Router; Installation Safety Warnings for Juniper Networks Devices

Juniper ACX5048
232 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advarsel Endelig disponeringavdetteproduktet skje i henhold til nasjonale
lover og forskrifter.
Aviso A descartagem final deste produto deverá ser efectuada de acordo
com os regulamentos e a legislação nacional.
¡Atención! El desecho final de este producto debe realizarse según todas las
leyes y regulaciones nacionales
Varning! Slutlig kasseringav denna produktbör skötas i enlighetmed landets
alla lagar och föreskrifter.
Related
Documentation
General Safety Guidelines for Juniper Networks Devices on page 167
General Safety Warnings for Juniper Networks Devices on page 170
Chassis Lifting Guidelines for an ACX5000 Router
The weight of a 1 U fully loaded ACX5048 chassis is approximately 21.8 lb (9.9 kg); the
2 U ACX5096 SKU is approximately 32.5 lbs (14.74 kg). Observe the following guidelines
for lifting and moving an ACX5000 router:
CAUTION: If you are installing the ACX5000 router above 60 in. (152.4 cm)
from the floor, either remove the power supplies, fan modules, and any
expansion modules before attempting to install the router, or ask someone
to assist you during the installation.
Before installing an ACX5000 router, read the guidelines in “Site Preparation Checklist
for an ACX5000 Router on page 45 to verify that the intended site meets the specified
power, environmental, and clearance requirements.
Before lifting or moving the ACX5000 router, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Related
Documentation
Mounting an ACX5000 Router in a Rack or Cabinet on page 104
Installation Safety Warnings for Juniper Networks Devices
Supported Platforms ACX Series, JCS 1200, M Series, MX Series, PTX Series, T Series
Observe the following warnings before and during hardware equipment installation:
Intra-Building Ports Warning on page 189
Installation Instructions Warning on page 189
Copyright © 2015, Juniper Networks, Inc.188
ACX5048 and ACX5096 Universal Access Router

Table of Contents

Other manuals for Juniper ACX5048

Related product manuals