ACX2000 and ACX2100 Universal Metro
Routers Quick Start
January 2015
Part Number: 530-062128
Revision 01
This document describes how to install the Juniper Networks
®
ACX2000 and ACX2100 Universal Metro
Router.
Contents
ACX2000 and ACX2100 Quick Start Description | 3
Step 1: Prepare the Site for Installation | 6
Step 2: Install the Router | 8
Tools Required to Install the Router in a Rack | 8
Install the Mounting Brackets | 8
Install the ACX Series Router in the Rack | 9
Step 3: Ground the ACX2000 and ACX2100 Router | 11
Tools Required to Ground the ACX Router | 11
Connect the Grounding Cable | 11
Step 4: Connect External Devices and Cables | 14
Tools Required to Connect External Devices and Cables | 14
Connect the ACX Series Router to a Network for Out-of-Band Management | 14
Connect the ACX Series Router to a Management Console or Auxiliary Device | 15
Connect Network Interface Cables to the ACX Series Router | 15
Step 5: Connect Power to the ACX Series Router | 17
Connect AC Power to an AC-Powered ACX2100 Series Router | 17
Connect DC Power to a DC-Powered ACX2000 or ACX2100 Router | 18
Step 6: Perform Initial Software Configuration | 21
Enter Configuration Mode | 21
Configure User Accounts and Passwords | 22
1
To Next Page
General
