What to do if my Juniper ACX1000 Network Router has active alarms?
To address active alarms on your Juniper Network Router: * First, check the system LED on the front panel. A steady green light indicates normal operation without alarms. * If the LED is not green, use the `show chassis alarms` command to check the router's status and identify any specific issues.
General| Brand | Juniper |
|---|---|
| Model | ACX1000 |
| Category | Network Router |
| Language | English |
Explains how to properly ground the router for safety and performance.
Details the electrical specifications for DC-powered routers.
Provides a step-by-step guide to installing and connecting the router.
Detailed procedure for securely mounting the router in a rack.
Essential safety procedure for grounding the router before connecting power.
Instructions for connecting DC power cables to the router.
Steps for connecting AC power cords to the ACX1100 router.
Steps for the initial configuration of the router using Junos OS CLI.
Steps to safely remove a transceiver from the router.
Steps to safely install a transceiver into the router.
Information on how to contact Juniper Networks Technical Assistance Center (JTAC).
Command to display hardware inventory and component serial numbers.
Procedure for returning hardware components for repair or replacement.
Essential safety guidelines for handling and operating Juniper devices.
Measures to prevent damage to components from static electricity.
Safety guidelines for lifting and moving the router chassis.
To Next Page
