Table 17: Site Preparation Checklist (continued)
DatePerformed ByFor More InformationItem or Task
“Clearance Requirements for Airflow
and Hardware Maintenance on
ACX1000 and ACX1100 Routers” on
page 56
Plan rack or cabinet location, including required
space clearances.
Secure the rack or cabinet to the floor and
building structure.
Cables
Acquire cables and connectors:
•
Determine the number of cables needed
based on your planned configuration.
•
Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
Plan the cable routing and management.
Related
Documentation
Installing and Connecting an ACX1000 or ACX1100 Router Overview on page 97•
• General Site Guidelines for ACX Series Routers on page 46
ACX1000 and ACX1100 Router Environmental Specifications
The router must be installed in a rack or cabinet housed in a dry, clean, well-ventilated,
and temperature-controlled environment.
Ensure that these environmental guidelines are followed:
•
The site must be as dust-free as possible, because dust can clog air intake vents and
filters, reducing the efficiency of the router cooling system.
•
Maintain ambient airflow for normal router operation. If the airflow is blocked or
restricted, or if the intake air is too warm, the router might overheat, leading to the
router temperature monitor shutting down the router to protect the hardware
components.
NOTE: Depending on the ambient temperature, it may take up to 5 minutes
for the router to heat up to the operating temperature.
Table 18 on page 49 provides the required environmental conditions for normal router
operation.
Copyright © 2017, Juniper Networks, Inc.48
ACX1000 and ACX1100 Universal Access Router
To Next Page
Loading...
Need help?
General
