Juniper ACX1000 User Manual

NOTE: For XFP transceivers that can support either the 10-Gigabit Ethernet
or SONET OC192/STM64 specifications, check the standard supported for
the device into which the transceiver is installed. For example, the
XFP-10G-E-OC192-IR2 transceiver installed in a 10-Gigabit Ethernet PIC
supports the 10GBASE-E standard. However, the XFP-10G-E-OC192-IR2
transceiver installed in a SONET OC192/STM64 PIC supports the SONET
OC192/STM64 IR2 standard.
Table 27 on page 69 is organized by transmission speed and then alphabetically by model
number.
Table 30: Supported Ethernet Standards
SpecificationsStandard
Monitoring
AvailableConnector
Transceiver
TypeModel Number
Ethernet 10BASE, Fast Ethernet 100BASE, and Gigabit Ethernet 1000BASE Specifications
•
Fast Ethernet
100BASE-FX Optical
Interface Specifications
100BASE-FXNoLCSFPSFP-1FE-FX
•
Ethernet 10BASE-T
Copper Interface
Specifications
•
Fast Ethernet
100BASE-T Copper
Interface Specifications
•
Gigabit Ethernet
1000BASE-T Copper
Interface Specifications
10/100/1000
BASE-T
NoRJ-45SFPSFP-1GE-FE-E-T
•
Gigabit Ethernet
1000BASE Optical
Interface Specifications
1000BASE-LHYesLCSFPSFP-1GE-LH
•
Gigabit Ethernet
1000BASE Optical
Interface Specifications
1000BASE-LX
1000BASE-LX10
YesLCSFPSFP-1GE-LX
•
Gigabit Ethernet
1000BASE Optical
Interface Specifications
1000BASE-SXYesLCSFPSFP-1GE-SX
•
Gigabit Ethernet
1000BASE-T Copper
Interface Specifications
1000BASE-TNoRJ-45SFPSFP-1GE-T
•
Fast Ethernet and
Gigabit Ethernet
Bidirectional SFP Optical
Interface Specifications
100BASE-BXNoLCSFPSFP-FE20KT13R15
83Copyright © 2017, Juniper Networks, Inc.
Chapter 10: Transceiver and Cable Specifications

Juniper ACX1000 Specifications

General

Brand	Juniper
Model	ACX1000
Category	Network Router
Language	English