Juniper ACX1000 User Manual

Table 8: RJ-45 Port Features (continued)
DescriptionFeature
ACX1000: 0/1/0 through 0/1/7 and 0/2/0 (Cu) through 0/2/3
(Cu)
ACX1100: 0/0/0 through 0/0/7 and 0/1/0 through 0/1/3
Port numbering (hardware)
ACX1000: ge-0/1/0 through ge-0/1/7 and ge-0/2/0 through
ge-0/2/3
ACX1100: ge-0/0/0 through ge-0/0/7 and ge-0/1/0 through
ge-0/1/3
Port numbering (software)
Gigabit Ethernet SFP Ports
The Gigabit Ethernet SFP ports located on the front of the chassis allow you to install
the Gigabit Ethernet transceivers listed in Table 9 on page 34.
Table 9: Gigabit Ethernet SFP Port Features
DescriptionFeature
•
1000BASE-BX (model number pairs: SFP-GE10KT13R14 with
SFP-GE10KT14R13, SFP-GE10KT13R15 with SFP-GE10KT15R13,
SFP-GE40KT13R15 with SFP-GE40KT15R13)
•
1000BASE-EX (model number SFP-GE40KM)
•
1000BASE-LH (model number SFP-1GE-LH-ET)
•
1000BASE-LX (model number SFP-1GE-LX-ET)
•
1000BASE-SX (model numbers SFP-1GE-SX and SFP-1GE-SX-ET)
Supported standards
Fiber-optic cableCable
Duplex LC/PC (Rx and Tx)Connector
•
ACX1000: 0/2/0 through 0/2/3
•
ACX1100: 0/1/0 through 0/1/3
Port numbering
(hardware)
•
ACX1000: ge-0/2/0 through ge-0/2/3
•
ACX1100: ge-0/1/0 through ge-0/1/3
Port numbering (software)
Related
Documentation
ACX1000 and ACX1100 Universal Access Router Overview on page 3•
• Front Panel of an ACX1000 Router on page 30
• LEDs on ACX1000 and ACX1100 Routers on page 35
Copyright © 2017, Juniper Networks, Inc.34
ACX1000 and ACX1100 Universal Access Router

Juniper ACX1000 Specifications

General

Brand	Juniper
Model	ACX1000
Category	Network Router
Language	English