into the AC appliance inlet coupler. The plug at the male end of the power cord fits into
the power source receptacle that is standard for your geographic location.
Table 22 on page 60 provides specifications on the AC power cord provided for each
country or region.
Table 22: AC Power Cord Specifications
Design StandardPlug TypeElectrical SpecificationModel NumberCountry
AS/NZZS 3112-2000SAA/3250 VAC, 10 A, 50 HzCBL-GP-C15-AUAustralia
GB2099, GB1002PRC/3250 VAC, 10 A, 50 HzCBL-GP-C15-CHChina
CEE (7) VIIVIIG250 VAC, 10 A, 50 HzCBL-GP-C15-EUEurope (except Italy,
Switzerland, and
United Kingdom)
CEI 23–16I/3G250 VAC, 10 A, 50 HzCBL-GP-C15-ITItaly
JIS 8303498GJ125 VAC, 15 A, 50 Hz or 60 HzCBL-GP-C15-JPJapan
CEE (7) VIIVIIG250 VAC, 10 A, 50 HzCBL-GP-C15-KRKorea
SEV 1011 / 6534-212G250 VAC, 10 A, 50 HzCBL-GP-C15-SZSwitzerland
NEMA 5-15498G125 VAC, 13 A, 60 HzCBL-GP-C15-USNorth America
BS 1363/ABS89/13250 VAC, 10 A, 50 HzCBL-GP-C15-UKUnited Kingdom
WARNING: The AC power cord for the router is intended for use with the
router only and not for any other use.
WARNING: The attached power cable is only for this product. Do not use the
cable for another product. Translation in Japanese follows:
Copyright © 2017, Juniper Networks, Inc.60
ACX1000 and ACX1100 Universal Access Router
To Next Page
Loading...
Need help?
General
