Juniper ACX1000 User Manual

CHAPTER 10
Transceiver and Cable Specifications
•
Network Cable and Transceiver Overview for ACX Series, M Series, and MX Series
Routers on page 81
•
Supported Network Interface Standards by Transceiver for ACX Series, M Series, MX
Series, and T Series Routers on page 82
•
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 90
•
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 92
Network Cable and Transceiver Overview for ACX Series, M Series, and MX Series
Routers
Juniper Networks devices support a variety of fixed and pluggable transceivers and
network cable, including multimode and single-mode fiber-optic cable. For a list of
transceivers, see “Supported Network Interface Standards by Transceiver for ACX Series,
M Series, MX Series, and T Series Routers” on page 68. To determine which transceivers
and network cables are supported in a particular device, see the “Cables and connectors”
section in the PIC guide or the MX Series Interface Module Reference.
For transceiver and cable specifications, see:
•
Ethernet 10BASE-T Copper Interface Specifications
•
Fast Ethernet 100BASE-T Copper Interface Specifications
•
Gigabit Ethernet 1000BASE-T Copper Interface Specifications
•
Fast Ethernet 100BASE-FX Optical Interface Specifications
•
Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications
•
Gigabit Ethernet 1000BASE Optical Interface Specifications
•
10-Gigabit Ethernet 10GBASE Optical Interface Specifications
•
40-Gigabit Ethernet 40GBASE-R Optical Interface Specifications
•
100-Gigabit Ethernet 100GBASE-R Optical Interface Specifications
•
SONET/SDH OC3/STM1 Optical Interface Specifications
•
SONET/SDH OC12/STM4 Optical Interface Specifications
81Copyright © 2017, Juniper Networks, Inc.

Juniper ACX1000 Specifications

General

Brand	Juniper
Model	ACX1000
Category	Network Router
Language	English