Installation Safety Warnings for Juniper Networks Devices
Observe the following warnings before and during hardware equipment installation:
•
Intrabuilding Ports Warning on page 164
•
Installation Instructions Warning on page 164
•
Rack-Mounting Requirements and Warnings on page 165
•
Ramp Warning on page 168
Intrabuilding Ports Warning
WARNING: The intrabuilding ports of the equipment or subassembly are
suitable for connection to intrabuilding or unexposed wiring or cabling only.
The intrabuilding ports of the equipment or subassembly MUST NOT be
metallicallyconnected to interfaces that connect tothe Outside Plant (OSP)
or its wiring. These interfaces are designed for use as intrabuilding interfaces
only (Type 2 or Type 4 ports as described in GR-1089) and require isolation
from the exposed OSP cabling. The addition of Primary Protectors is not
sufficient protection in order to connect these interfaces metallically to OSP
wiring.
Installation Instructions Warning
WARNING: Read the installation instructionsbeforeyouconnectthe hardware
equipment to a power source.
Waarschuwing Raadpleegde installatie-aanwijzingenvoordat u het systeem
met de voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmänyhdistämistävirtalähteeseen.
Attention Avantde brancher le systèmesur la source d'alimentation, consulter
les directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an
die Stromquelle anschließen.
Avvertenza Consultarele istruzioni di installazione prima di collegareil sistema
all'alimentatore.
Advarsel Les installasjonsinstruksjonene før systemet kobles til strømkilden.
Aviso Leia as instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Copyright © 2017, Juniper Networks, Inc.164
ACX1000 and ACX1100 Universal Access Router
To Next Page
Loading...
Need help?
General
