CHAPTER 27
Electrical Guidelines and Warnings
•
In Case of an Electrical Accident on page 181
•
General Electrical Safety Warnings for Juniper Networks Devices on page 181
•
General Electrical Safety Guidelines and Electrical Codes for Juniper Networks
Devices on page 185
•
ACX1100 AC Power Electrical Safety Guidelines and Warnings on page 186
•
ACX1000 and ACX1100 DC Power Electrical Safety Guidelines on page 187
•
DC Power Electrical Safety Warnings for Juniper Networks Devices on page 188
•
Site Electrical Wiring Guidelines for Juniper Networks Devices on page 191
In Case of an Electrical Accident
If an electrical accident results in an injury, take the following actions in this order:
1. Use caution. Be aware of potentially hazardous conditions that could cause further
injury.
2. Disconnect power from the router.
3. If possible, send another person to get medical aid. Otherwise, assess the condition
of the victim, then call for help.
Related
Documentation
General Safety Guidelines for Juniper Networks Devices on page 155•
• General Safety Warnings for Juniper Networks Devices on page 156
General Electrical Safety Warnings for Juniper Networks Devices
•
Grounded Equipment Warning on page 182
•
Grounding Requirements and Warning on page 182
•
Midplane Energy Hazard Warning on page 183
•
Multiple Power Supplies Disconnection Warning on page 183
•
Power Disconnection Warning on page 184
181Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
