EasyManuals Logo

Juniper ACX1000 User Manual

Juniper ACX1000
216 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #100 background imageLoading...
Page #100 background image
SONET/SDH OC48/STM16 Optical Interface Specifications
SONET/SDH OC192/STM64 Optical Interface Specifications
Related
Documentation
Understanding Fiber-Optic Cable Signal Loss, Attenuation, and Dispersion on page 76
Calculating Power Budget and Power Margin for Fiber-Optic Cables on page 77
Supported Network Interface Standards by Transceiver for ACX Series, M Series, MX
Series, and T Series Routers
Table 27 on page 69 and Table 28 on page 75 list the transceivers supported by ACX, M,
MX, and T Series devices.
NOTE: Not all transceivers are supported on all devices. To determine which
transceivers are supported in a particular device, see the “Cables and
Connectors” section for each PIC, MIC, or line card in the Interface Module
Reference for your device, or see the Hardware Compatibility Tool.
TIP: You can use the Hardware Compatibility Tool to find information about
the pluggable transceivers supported on your Juniper Networks device.
Table 27 on page 69 lists the supported Ethernet standards for each transceiver.
Table 28 on page 75 lists the supported SONET standards for each transceiver.
Some transceivers support monitoring by using the operational mode CLI command
show interfaces diagnostics optics. To determine which transceivers support monitoring,
refer to the “Monitoring Available” column in Table 27 on page 69 and Table 28 on page 75.
For a description of the monitoring fields displayed by the transceiver, see show interfaces
diagnostics optics (Gigabit Ethernet, 10-Gigabit Ethernet, 40-Gigabit Ethernet, 100-Gigabit
Ethernet, and Virtual Chassis Port) or show interfaces diagnostics optics (SONET).
CAUTION: If you face a problem running a Juniper Networks device that uses
a third-party optic or cable, the Juniper NetworksTechnical Assistance Center
(JTAC) can help you diagnose the source of the problem. Your JTAC engineer
might recommend thatyou check the third-party optic or cable and potentially
replace it with an equivalent Juniper Networks optic or cable that is qualified
for the device.
Copyright © 2017, Juniper Networks, Inc.82
ACX1000 and ACX1100 Universal Access Router

Table of Contents

Other manuals for Juniper ACX1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Juniper ACX1000 and is the answer not in the manual?

Juniper ACX1000 Specifications

General IconGeneral
BrandJuniper
ModelACX1000
CategoryNetwork Router
LanguageEnglish

Related product manuals