CHAPTER 24
Installation Safety Guidelines and
Warnings
•
ACX1000 and ACX1100 Chassis Lifting Guidelines on page 163
•
Installation Safety Warnings for Juniper Networks Devices on page 164
ACX1000 and ACX1100 Chassis Lifting Guidelines
The weight of a fully configured chassis is about 7 lb (3.2 kg). Observe the following
guidelines for lifting and moving the router:
•
Before moving the router, read the guidelines in “Site Preparation Checklist for ACX1000
and ACX1100 Routers” on page 45 to verify that the intended site meets the specified
power, environmental, and clearance requirements.
•
Before lifting or moving the router, disconnect all external cables.
To lift routing devices and components, use the following lifting guidelines:
•
Up to 39.7 lb (18 kg) one person lift.
•
39.7 lb (18 kg) to 70.5 lb (32 kg) two or more person lift.
•
70.5 lb (32 kg) to 121.2 lb (55 kg) three or more person lift.
•
Above 121.2 lb (55 kg) material handling systems (such as levers, slings, lifts and so
on) must be used. When this is not practical, specially trained persons or systems
must be used (riggers or movers).
•
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
Related
Documentation
General Site Guidelines for ACX Series Routers on page 46•
• Installing and Connecting an ACX1000 or ACX1100 Router Overview on page 97
163Copyright © 2017, Juniper Networks, Inc.
To Next Page
Loading...
Need help?
General
