To Next PageTo Next PageWhat to do if my Juniper Network Router has an alarm condition?
If your Juniper Network Router is showing an alarm condition, check the system LED on the front panel. A normally functioning router without alarms will have a steady green system LED. You can also use the command 'show chassis alarms' to check the router's status.
General| Model | ACX2100 |
|---|---|
| Product Series | ACX Series |
| Category | Network Router |
| Total Ports | 8 |
| 10/100/1000BASE-T ports | 8 |
| 100BASE-FX/1000BASE-X SFP ports | 4 |
| 10GBASE-X SFP+ ports | 0 |
| Jumbo frames | Yes |
| Operating System | Junos OS |
| Memory | 4 GB |
| Storage | 8 GB |
| Operating Temperature | 0 to 40 °C |
| Operating Humidity | 5% to 95% RH, non-condensing |
| Input voltage | 100 to 240 V AC |
| Management Ports | 1 |
Details the process of attaching mounting brackets to the router chassis for rack installation.
Describes how to physically mount the router into a rack, ensuring stability and proper alignment.
Explains how to connect the router to earth ground using the grounding cable and lug.
Outlines the procedure for connecting AC power to the router using power cords.
Details the steps for connecting DC power to the router, including terminal connections and verification.
Explains how to log in and access the router's command-line interface (CLI) for configuration.
