Juniper ACX5048 User Manual

modules are designed so that they can only be inserted into the ACX5000
product SKU that supports the same airflow type. See “Cooling System
and Airflow in an ACX5000 Router” on page 33 for more information.
4. Using a Phillips screwdriver, turn the locking screw until it is tight.
Figure 44: Installing a Fan Module in a 1 U ACX5048
Figure 45: Installing a Fan Module in a 2 U ACX5096
Related
Documentation
Removing a Fan Module from an ACX5000 Router on page 134•
• Cooling System and Airflow in an ACX5000 Router on page 33
• Field-Replaceable Units in an ACX5000 Router on page 5
• Management Panel of an ACX5000 Router on page 17
Removing a Fan Module from an ACX5000 Router
The fan modules in ACX5000 routers are hot-removable and hot-insertable field
replaceable units (FRUs): you can remove and replace them without powering off the
router or disrupting routing functions.
CAUTION: Replacea failedfanmodulewith anew fan module within 1 minute
of removal to prevent chassis overheating. Before removing the fan module,
ensure you have a replacement fan module at hand.
Before you remove a fan module from a ACX5000 router, ensure that you have taken
the necessary precautions to prevent electrostatic discharge (ESD) damage (see
Prevention of Electrostatic Discharge Damage).
Copyright © 2015, Juniper Networks, Inc.134
ACX5048 and ACX5096 Universal Access Router

Juniper ACX5048 Specifications

General

Brand	Juniper
Model	ACX5048
Category	Network Router
Language	English