ACX5000 Router Models
The ACX5000 routers come in two model, one with have 48 port configuration and the
other with 96 port configurations. All the routers are available with either AC or DC power
supply and with airflow-out(AFO) cooling. AFO is also sometimes known as front-to-back
cooling.
Table 3 on page 5 lists the ordering numbers for ACX5000 routers.
Table 3: ACX5000 Router Model Numbers and Description
Airflow
Number
of
Management
Ports
Power
SupplyPortsModel Number
Air Out (front-to-back)3AC48 SFP+ and 6 QSFP+
transceivers
ACX5048-AC
Air Out (front-to-back)3DC48 SFP+ and 6 QSFP+
transceivers
ACX5048-DC
Air Out (front-to-back)2AC96 SFP+ and 8 QSFP+
transceivers
ACX5096-AC
Air Out (front-to-back)2DC96 SFP+ and 8 QSFP+
transceivers
ACX5096-DC
CAUTION: Do not mix different types (AC and DC) of power supplies in the
same chassis.
Related
Documentation
ACX5000 Universal Access Router Overview on page 3•
Field-Replaceable Units in an ACX5000 Router
Field-replaceable units (FRUs) are components that you can replace at your site. The
ACX5000 FRUs are hot-insertable and hot-removable: you can remove and replace
them without powering off the router or disrupting the routing function.
The following are the ACX5000 FRUs:
•
Power supplies
•
Fan modules
Table 4 on page 6 lists the FRUs for the ACX5000 and actions to take before removing
them.
5Copyright © 2015, Juniper Networks, Inc.
Chapter 1: System Overview and Architecture
To Next Page
Loading...
