Juniper ACX5048 - Laser and LED Safety Guidelines and Warnings for the ACX Router; General Laser Safety Guidelines; Class 1 M Laser Product Warning

• Installation Safety Warnings for Juniper Networks Devices on page 188
Laser and LED Safety Guidelines and Warnings for the ACX Router
ACX5000 routers are equipped with laser transmitters:
•
SFP and SFP+ transceivers are classified as Class 1 Laser Products (complies with 21
CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice 50, dated July
26, 2001) or Class 1 LED Products.
•
QSFP+ and QSFP28 transceivers are classified as Class 1M Laser Products (IEC 60825-1
2001–01).
Observe the following guidelines and warnings:
•
General Laser Safety Guidelines on page 178
•
Class 1M Laser Product Warning on page 178
•
Class 1M Laser Radiation Warning on page 179
•
Class 1 Laser Product Warning on page 179
•
Class 1 LED Product Warning on page 179
•
Laser Beam Warning on page 180
•
Unterminated Fiber-Optic Cable Warning on page 181
General Laser Safety Guidelines
When working around ports that support optical transceivers, observe the following
safety guidelines to prevent eye injury:
•
Do not look into unterminated ports or at fibers that connect to unknown sources.
•
Do not examine unterminated optical ports with optical instruments.
•
Avoid direct exposure to the beam.
WARNING: Unterminated optical connectors can emit invisible laser
radiation. The lens in the human eye focuses all the laser power on the
retina, so focusing the eye directly on a laser source—even a low-power
laser—could permanently damage the eye.
Class 1M Laser Product Warning
WARNING: Class 1M laser product.
Waarschuwing Laserproducten van Klasse 1M (IEC).
Varoitus Luokan 1M (IEC) lasertuotteita.
Copyright © 2015, Juniper Networks, Inc.178
ACX5048 and ACX5096 Universal Access Router