Juniper ACX5048 - AC Power Cord Specifications for an ACX5000 Router

• General Safety Guidelines and Warnings
• General Electrical Safety Guidelines and Warnings
AC Power Cord Specifications for an ACX5000 Router
Detachable AC power cords are shipped with the chassis, if you include them as part of
your order. The coupler is type C13 as described by International Electrotechnical
Commission (IEC) standard 60320. The plug at the male end of the power cord fits into
the power source outlet that is standard for your geographical location.
NOTE: In North America, AC power cords must not exceed 14.75 feet
(approximately 4.5 meters)in length, to comply withNational Electrical Code
(NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical
Code (CEC) Section 4-010(3). The cords that can be ordered for the ACX
Series routers are in compliance.
Table 26 on page 54 lists AC power cord specifications provided for each country or
region.
Table 26: AC Power Cord Specifications
GraphicJuniper Model NumberPlug StandardsElectrical SpecificationsCountry/Region
CBL-GP-PWR-C13-AUAS/NZ 3109-1996250 VAC, 10 A, 50 HzAustralia
CBL-GP-PWR-C13-CHGB 1002-1996250 VAC, 10 A, 50 HzChina
CBL-GP-PWR-C13-EUCEE (7) VII250 VAC, 10 A, 50 HzEurope (except Italy,
Switzerland,and United
Kingdom)
CBL-GP-PWR-C13-ITCEI 23-16/VII250 VAC, 10 A, 50 HzItaly
g021275
CBL-GP-PWR-C13-JPJIS C8303125 VAC, 12 A, 50 Hz or 60 HzJapan
g021274
CBL-GP-PWR-C13-USCAN/CSA No. 49-92125 VAC, 13 A, 60 HzNorth America
CBL-GP-PWR-C13-KRKSC 8305; K60884-1250 VAC, 10 A, 60 HzSouth Korea
CBL-GP-PWR-C13-SZSEV 1011 SEV 1991; EN
60320 C13
250 VAC, 10 A, 50 HzSwitzerland
CBL-GP-PWR-C13-UKBS 1363/A250 VAC, 10 A, 50 HzUnited Kingdom
Copyright © 2015, Juniper Networks, Inc.54
ACX5048 and ACX5096 Universal Access Router