Table 20: Site Preparation Checklist (continued)
DatePerformed ByFor More InformationItem or Task
“Rack Requirements for an ACX5000
Router” on page 49
“Cabinet Requirements for an
ACX5000 Router” on page 50
Verify that your rack or cabinet meets the
minimum requirements for the installation of
the router.
“Clearance Requirements for Airflow
and Hardware Maintenance for an
ACX5000 Router” on page 51
Plan rack or cabinet location, including
required space clearances.
Secure the rack or cabinet to the floor and
building structure.
Cables
“Interface Specifications for SFP, SFP+,
and QSFP+ Transceivers for an
ACX5000 Router” on page 62
“Interface Specifications for SFP+ DAC
Cables for an ACX5000 Router” on
page 77
Acquire cables and connectors:
•
Determine the number of cables needed
based on your planned configuration.
•
Review the maximum distance allowed for
each cable. Choose the length of cable
based on the distance between the
hardware components being connected.
Plan the cable routing and management.
Related
Documentation
General Safety Guidelines and Warnings•
• General Site Guidelines
• Installing and Connecting an ACX5000 Router on page 103
• Mounting an ACX5000 Router in a Rack or Cabinet on page 104
General Site Guidelines for an ACX Series Routers
Supported Platforms ACX Series
Efficient device operation requires proper site planning and maintenance and proper
layout of the equipment, rack or cabinet (if used), and wiring closet.
To plan and create an acceptable operating environment for your device and prevent
environmentally caused equipment failures:
•
Keep the area around the chassis free from dust and conductive material, such as
metal flakes.
•
Follow prescribed airflow guidelines to ensure that the cooling systemfunctions properly
and that exhaust from other equipment does not blow into the intake vents of the
router.
Copyright © 2015, Juniper Networks, Inc.46
ACX5048 and ACX5096 Universal Access Router
To Next Page
Loading...
