CHAPTER 10
Installing the Router
•
Installing and Connecting an ACX5000 Router on page 103
•
Mounting an ACX5000 Router in a Rack or Cabinet on page 104
Installing and Connecting an ACX5000 Router
You can mount an ACX5000 router:
•
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets
provided with the router for this configuration.
•
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket
provided in the standard mounting kit for this configuration. Recessed mounting is
primarily used in enclosed cabinets.
To install and connect an ACX5000 router:
1. Follow the instructions in “Unpacking an ACX5000 Router” on page 101.
2. Determine how the device is to be mounted.
Flush or recessed mounted in a rack or cabinet, see “Mounting an ACX5000 Router
in a Rack or Cabinet” on page 104.
3. Follow the instructions in:
a. Connecting Earth Ground to an ACX5000 Router on page 112
b. “Connecting AC Power to an ACX5000 Router” on page 114 or “Connecting DC
Power to an ACX5000 Router” on page 116 as required
c. Registering Products–Mandatory for Validating SLAs
4. Configure the ACX5000 router. See “Configuring an ACX5000 Router” on page 125.
Related
Documentation
Rack Requirements for an ACX5000 Router on page 49•
• Cabinet Requirements for an ACX5000 Router on page 50
• Clearance Requirements for Airflow and Hardware Maintenance for an ACX5000
Router on page 51
103Copyright © 2015, Juniper Networks, Inc.
To Next Page
Loading...
