Juniper ACX5048 - Chapter 9 Unpacking the Router

CHAPTER 9
Unpacking the Router
•
Unpacking an ACX5000 Router on page 101
Unpacking an ACX5000 Router
The ACX5000 router chassis is a rigid sheet-metal structure that houses the hardware
components. An ACX5000 router is shipped in a cardboard carton, secured with foam
packing material. The carton also contains an accessory box and quick start instructions.
CAUTION: ACX5000 routers are maximally protected inside the shipping
carton. Do not unpack the router until you are ready to begin installation.
To unpack an ACX5000 router:
1. Move the shipping carton to a staging area as close to the installation site as possible,
but where you have enough room to remove the system components.
2. Position the carton so that the arrows are pointing up.
3. Open the top flaps on the shipping carton.
4. Remove the accessory box and verify the contents against the inventory included in
the box. Table 49 on page 102 lists the inventory of components supplied with an
ACX5000 router.
5. Pull out the packing material holding the router in place.
6. Verify the chassis components received:
•
Two power supplies
•
Fan modules:
•
Five fan modules for ACX5048
•
Three fan modules for ACX5096
7. Save the shipping carton and packing materials in case you need to move or ship the
router later.
101Copyright © 2015, Juniper Networks, Inc.