Juniper ACX5048 - ACX5000 System Software Overview; Protocols and Applications Supported by the ACX Routers

ACX5000 System Software Overview
ACX5000 routers use the Junos operating system (OS), which provides Layer 2 and
Layer 3 switching, routing, and security services. Junos OS is installed on an ACX5000
router’s 32-gigabyte (GB) internal solid state flash drive. The same Junos OS code base
that runs on an ACX5000 routers also runs on all Juniper Networks QFX and EX Series
switches, and J Series, M Series, MX Series, ACX Series and T Series routers.
For more information about which features are supported on an ACX5000 routers, see
“Protocols and Applications Supported by the ACX Routers” on page 10.
You manage the router using the Junos OS command-line interface (CLI), accessible
through the console and out-of-band management ports on the router.
Protocols and Applications Supported by the ACX Routers
Supported Platforms ACX Series
Table 7 on page 10 contains the first Junos OS Release support for protocols and
applications on ACX routers. A dash indicates that the protocol or application is not
supported.
NOTE: The [edit logical-systems logical-system-name] hierarchy level is not
supported on ACX Series routers.
Table 7: Protocols and Applications Supported by ACX Series Routers
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
Interface and
Encapsulation Types
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Ethernet
interfaces—1/100/1000, 1G,
10G
15.1X54–D2015.1X54–D20–––––Ethernet interfaces—40G
–––12.2R212.212.2R212.2ATM interfaces (IMA only)
–––12.2R212.212.2R212.2E1 interfaces
–––12.2R212.212.2R212.2T1 interfaces
––12.3x51-D1012.2R212.212.2R212.2Circuit emulation interfaces
(SAToP)
––12.3x51-D10
(requires a
MIC)
SONET/SDH interfaces
Copyright © 2015, Juniper Networks, Inc.10
ACX5048 and ACX5096 Universal Access Router