Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
Layer 3
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Static routes
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2OSPF
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IS-IS
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2BGP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Internet Control Message
Protocol (ICMP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Address Resolution
Protocol (ARP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Bidirectional Forwarding
Detection (BFD) protocol
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Dynamic Host
Configuration Protocol
(DHCP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IP fast reroute (FRR)
(OSPF, IS-IS)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Maximumtransmissionunit
(MTU) 1518
15.1X54–D2015.1X54–D2012.3x51-D1012.3R112.3R112.3R112.3R1Layer 3 VPNs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2RSVP
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2LDP (targeted and direct)
MPLS, VPLS, VPNs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Static label-switched path
(LSP)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2FRR
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Traffic engineering
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2E-LINE
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Pseudowire Emulation
Edge to Edge (PWE3
[signaled])
11Copyright © 2015, Juniper Networks, Inc.
Chapter 1: System Overview and Architecture
To Next Page
Loading...
