Juniper ACX5048 - ACX5096 Router Hardware and CLI Terminology Mapping

Table 5: CLI Equivalents of Terms Used in Documentation for an ACX5048 Router (continued)
Additional InformationItem in Documentation
Value (as displayed
in the CLI)
Description (as
displayed in the
CLI)
Hardware
Item (as
displayedin
the CLI)
“ACX5000 Universal Access
Router Overview” on page 3
Built-in network ports on
the front panel of the
router
PIC 048x10G–6x40G
Port and Interface SpecificationsOptical transceiversn is a value
equivalent to the
number of the port in
which the transceiver
is installed.
Abbreviated name of
the transceiver
Xcvr (n)
“AC Power Supply for an
ACX5000 Router” on page 37
“DC Power Supply for an
ACX5000 Router” on page 39
AC power supply
DC power supply
n is a value in the
range of 0-1.
Power supplyPower
supply (n)
“Cooling System and Airflow in
an ACX5000 Router” on page 33
Fann is a value in the
range of 0-4.
FanFan
Figure 3: ACX5048 Interface Port Mapping
g0008 0 9
1 2
3
3—1— 40 Gigabit Ethernet ports (6)Electrostatic Discharge (ESD) terminal
2—10 Gigabit Ethernet ports (48)
ACX5096 Router Hardware and CLI Terminology Mapping
Table 6 on page 8 describes the hardware terms used in an ACX5096 router
documentation and thecorresponding terms used inthe Junos OS command line interface
(CLI). Figure 4 on page 9 shows the port locations of the interfaces.
Table 6: CLI Equivalents of Terms Used in Documentation for an ACX5096 Router
Additional InformationItem in Documentation
Value (as displayed
in the CLI)
Description (as
displayedin the CLI)
Hardware
Item (as
displayedin
the CLI)
“Chassis Physical Specifications
for an ACX5000 Router” on
page 49
Router chassis–ACX5096Chassis
Copyright © 2015, Juniper Networks, Inc.8
ACX5048 and ACX5096 Universal Access Router