To Next Page
R
randy99Jul 26, 2025
Why is my Juniper ACX5048 Network Router showing a high disk usage alarm?
- KKevin WilliamsJul 26, 2025
A predefined alarm on your Juniper Network Router might be triggered by high disk usage.
Why is my Juniper ACX5048 Network Router showing a high disk usage alarm?
A predefined alarm on your Juniper Network Router might be triggered by high disk usage.
Why is my Juniper Network Router showing a missing rescue configuration alarm?
A predefined alarm on your Juniper Network Router might be triggered by a missing rescue configuration.
Why is my Juniper ACX5048 Network Router showing a chassis alarm?
A chassis alarm on your Juniper Network Router is triggered by a physical condition, such as a power supply failure or excessive component temperature. You should follow appropriate troubleshooting steps for hardware issues.
What does a minor (yellow) alarm mean on my Juniper ACX5048 Network Router?
A minor (yellow or amber) alarm on a Juniper Network Router signals a noncritical condition that could lead to service interruption or performance degradation if ignored. It may also indicate a missing rescue configuration. Monitoring or maintenance is required to address the underlying issue.
Why is my Juniper Network Router showing a system alarm?
A system alarm on your Juniper Network Router can be triggered by several factors: a missing rescue configuration, failure to install a license for a licensed software feature, or high disk usage. You should address the specific condition that triggered the alarm.
General| Model | ACX5048 |
|---|---|
| Category | Network Router |
| Form Factor | 1U |
| Switching Capacity | 1.44 Tbps |
| Mounting | Rack-mountable |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Power Supply | Dual redundant AC or DC power supplies |
| Power Consumption | 300 W |
| Management | CLI, SNMP |
