Juniper ACX5048 - Installing a Power Supply in an ACX5000 Router

Figure 51: Removing Power Supply from an ACX5048
Figure 52: Removing Power Supply from an ACX5096
SEE ALSO
AC Power Supply for an ACX5000 Router | 65
DC Power Supply for an ACX5000 Router | 69
Installing a Power Supply in an ACX5000 Router
The power supplies in an ACX5000 router are hot-removable and hot-insertable field-replaceable units
(FRUs): you can remove and replace them without powering off the router or disrupting routing functions.
•
Before you install a power supply in a ACX5000 router, ensure that you have taken the necessary
precautions to prevent electrostatic discharge (ESD) damage (see “Prevention of Electrostatic Discharge
Damage” on page 196).
•
Ensure that the airflow direction of the power supply is the same as the chassis. Labels on the power
supply handle indicate the direction of airflow. See “Cooling System and Airflow in an ACX5000 Router”
on page 60 for more information.
To install a power supply in an ACX5000 router (see Figure 53 on page 139 and Figure 54 on page 139):
138