Juniper ACX5048 - Rack Requirements for an ACX5000 Router

SEE ALSO
Mounting an ACX5000 Router in a Rack or Cabinet | 103
Rack Requirements for an ACX5000 Router
All ACX5000 routers are designed to be installed on four-post racks. The ACX5096 can also be installed
on two-post racks.
Rack requirements consist of:
•
Rack type
•
Mounting bracket hole spacing
•
Rack size and strength
Table 28 on page 86 provides the rack requirements and specifications for an ACX5000 router.
Table 28: Rack Requirements for an ACX5000 Router
GuidelinesRack Requirement
Use a four-post rack that provides bracket holes or hole patterns spaced at 1 U (1.75 in.
or 4.45 cm) increments and that meets the size and strength requirements to support the
weight.
A U is the standard rack unit defined in Cabinets, Racks, Panels, and Associated Equipment
(document number EIA-310–D) published by the Electronics Industry Association.
Rack type (all router
models)
Use a two-post or four-post rack that provides bracket holes or hole patterns spaced at
1 U (1.75 in. or 4.45 cm) increments and that meets the size and strength requirements
to support the weight.
Rack type (ACX5096
only)
The holes in the mounting brackets are spaced at 1 U (1.75 in. or 4.45 cm), so that the
router can be mounted in any rack that provides holes spaced at that distance.
Mounting bracket hole
spacing (all router
models)
86