EasyManua.ls Logo

Juniper ACX5048 - DC Power Supply Leds on an ACX5000 Router

Juniper ACX5048
217 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DC Power Supply LEDs on an ACX5000 Router
Figure 25 on page 72 shows the location of the LEDs on the DC power supply.
Figure 25: DC Power Supply Faceplate on an ACX5000 Router
31 Fault LEDInput LED
2Output LED
CAUTION: The V+ terminals are shunted internally together, as are the V– terminals.
The same polarity terminal can be wired together from the same source to provide an
additional current path in a higher power chassis. Do not connect the terminals to
different sources.
Table 19 on page 72 describes the LEDs on the DC power supplies.
Table 19: DC Power Supply LEDs on an ACX5000 Router
DescriptionStateColorName
The power supply is disconnected from
power, or power is not coming into the power
supply.
OffUnlitInput
Power is coming into the power supply.On steadilyGreen
The power supply is disconnected from
power, or the power supply is not sending out
power correctly.
OffUnlitOutput
The power supply is sending out power
correctly.
On steadilyGreen
72

Table of Contents

Other manuals for Juniper ACX5048

Related product manuals