Juniper ACX5048 - ACX5048 and ACX5096 Site Guidelines and Requirements

Table 23: Site Preparation Checklist (continued)
DatePerformed ByFor More InformationItem or Task
“Determining Transceiver Support
for the ACX5000” on page 88
“Cable Specifications for QSFP+
and QSFP28 Transceivers” on
page 89
Acquire cables and connectors:
•
Determine the number of cables needed
based on your planned configuration.
•
Review the maximum distance allowed
for each cable. Choose the length of cable
based on the distance between the
hardware components being connected.
Plan the cable routing and management.
RELATED DOCUMENTATION
General Safety Guidelines and Warnings | 158
ACX5048 and ACX5096 Site Guidelines and
Requirements
IN THIS SECTION
General Site Guidelines | 80
Site Electrical Wiring Guidelines | 80
Clearance Requirements for Airflow and Hardware Maintenance for an ACX5000 Router | 81
Chassis Physical Specifications for an ACX5000 Router | 82
ACX5000 Router Environmental Specifications | 83
ACX5000 Chassis Grounding Cable and Lug Specifications | 84
Cabinet Requirements for an ACX5000 Router | 85
Rack Requirements for an ACX5000 Router | 86
79