Table 7: Protocols and Applications Supported by ACX Series Routers (continued)
ACX5096ACX5048ACX4000ACX2100ACX2000ACX1100ACX1000Protocol or Application
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Static Ethernet PWs
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Layer 2 circuits
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IEE802.1ag CC monitoring
on active and standby
pseudowires
15.1X54–D2015.1X54–D20–––––VPLS
Ethernet Layer 2
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Ethernet in the first mile
(EFM 802.3ah)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2802.1ag connectivity fault
management (CFM)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2IEE802.1ag interface-status
type, length, and value
(TLV)
QoS
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Firewall filters (access
control lists—ACLs)—family
inet
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Standard firewall filter
match conditions for MPLS
traffic
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Firewall filters—family
ccc/any
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Policing—per logical
interface
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Policing—per physical
interface
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Policing—per family
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2TrTCM (color aware, color
blind)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2SrTCM (color aware, color
blind)
15.1X54–D2015.1X54–D2012.3x51-D1012.2R212.212.2R212.2Host protection
Copyright © 2015, Juniper Networks, Inc.12
ACX5048 and ACX5096 Universal Access Router
To Next Page
Loading...
