Juniper SSG-320M-SH User Manual

FIPS 140-2 SECURITY POLICY
Juniper Networks, Inc.
SSG 320M and SSG 350M
HW P/N SSG-320M-SB, SSG-320M-SH, SSG-320M-SB-TAA, SSG-320M-SH-TAA, SSG-320M-SB-DC-N-TAA,
SSG-320M-SH-DC-N-TAA, SSG-350M-SB, SSG-350M-SH, SSG-350M-SB-TAA, SSG-350M-SH-TAA, SSG-
350M-SB-DC-N-TAA, SSG-350M-SH-DC-N-TAA , FW Version ScreenOS 6.3.0r6

Juniper SSG-320M-SH Specifications

General

Mini-Physical Interface Module (Mini-PIM) Slots	2
Fixed I/O	8 x 10/100/1000
Dimensions (W x H x D)	17.5 x 1.75 x 15.7 in (44.5 x 4.4 x 40 cm)
Input Voltage	100 to 240 VAC
Frequency	50 to 60 Hz
Operating Temperature	32°F to 104°F (0°C to 40°C)

Summary

Validation Level

Roles and Services

Cryptographic Officer Role

Defines the primary administrator role with full control over device configuration and security.

Authentication

Strength of Authentication

Operation In FIPS Mode

Initial Configuration

Firmware Loading and Authentication

Enabling FIPS Mode

Operating Restrictions in FIPS Mode

Security Rules

Self Tests

FIPS Approved Algorithms

Zeroization

Physical Security Policy

Physical Security Mechanism Inspection

Tamper Seal Placement - SSG320M

Tamper Seal Placement - SSG350M

Cryptographic Algorithm Validation

Critical Security Parameter (CSP) Definitions

CSP Matrix by Roles and Services