- 16 -
CLEANING AND MAINTENANCE
To avoid build-up of contaminants on your equipment it is recommended that you periodi-
cally clean the press platens and oil the moving parts.
When cleaning the press:
Disconnect the power cord from the wall outlet and make sure it is o and has cooled
down completely.
Clean the press with a soft cloth and a mild household cleaner, taking special care not to
allow liquid to run down below the heating elements and into the circuitry of the equip-
ment.
Allow press to fully dry (24 hours) before resuming operation
To Next Page
Loading...
Need help?
General