- 4 -
SAFETY NOTICES
• Use Extreme caution when operating: The platens get hot during operation and moving
parts can cause serious injury.
• Do not set the temperature above 350 degrees Fahrenheit. Excess temperature is un-
safe, diminishes the lifetime of the heating element and will negatively impact rosin yield
and quality.
• Do not use this press in a manner other than intended. Doing so will void the warranty,
damage the machine and may constitute a fire hazard.
• Never leave a powered-on machine unattended. Always power o the machine when
not in use. Allow press to cool completely before storing.
• Keep children away from the press. Burns may occur when touching hot surfaces and
moving parts can cause serious injury.
• Do not allow the power cord to touch hot surfaces.
• Do not operate the rosin press if the equipment has been damaged. Do not attempt
to repair this equipment yourself. Take it to a qualified electrician for inspection and repair.
Incorrect assembly or repair cause fire, electric shock, or other injury and will void all war-
ranties.
• Do not overload your electrical circuitry. To reduce the possibility of circuit over-
load, do not operate other equipment on the same circuit. A minimum 20 amp rated cord
should be used. Cords rated for less amperage may overheat and cause a fire hazard.
To Next Page
Loading...