Jura 735 - Page 23

23
4 Permanent settings in programming mode
Product Coffee strength Amount Temperature
Cappuccino,
Flat white
8 levels Coffee: 25ml–240ml
Milk: 3sec.–120sec.
normal, high
Latte macchiato 8 levels Coffee: 25ml–240ml
Milk: 3sec.–120sec.
Interval: 0sec.–60sec.
normal, high
Espresso macchiato 8 levels Coffee: 15ml–80ml
Milk: 3sec.–120sec.
normal, high
Portion of milk – Milk: 3sec.–120sec. –
Hot water,
hot water for green tea
– Water: 25ml–450ml low, normal, high
Permanent settings in programming mode always follow the same
model.
Example:Proceed as follows to change the coffee strength for one
coffee.
T Press the
‘Pc’ button.
T Press the
‘>’ button several times until ‘3/5’ is displayed.
T Press the
‘Expert mode’ button.
‘Expert mode’
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E To display more products, press the
‘>’ button (bottom right).
T Press the
‘Coffee’ button.
‘Coffee’
T Press the ‘Coffee strength’ button.
‘Coffee’ appears and the coffee strength is displayed.
T Press the
‘<’ or ‘>’ button to change the setting for the cof-
fee strength.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Coffee’
T Press the ‘’ button for around 2 seconds to exit program-
ming mode.