41
2 Preparation
pt
es
nl
it
fr
ru
en
de
the Aquadur® test strip and the description
on the packaging.
The water hardness can now be set.
Connecting milk
Your JURA creates fine, creamy, feather-light milk
foam with a perfect consistency. The most
important requirement for frothing milk is a milk
temperature of 4–8°C. We would therefore
recommend using a milk cooler or a vacuum milk
container.
T Remove the protective cover of the dual
spout.
T Connect the milk pipe to the dual spout.
T Connect the other end of the milk pipe to a
milk container or immerse it in a milk
carton.
E Ensure that the filling height of the milk is
no higher than the milk pipe connection on
the dual spout.
2 Preparation
E You can interrupt preparation at any time
while a speciality coffee, speciality coffee
with milk or hot water is being prepared. Just
press any button.
E Before and during the grinding operation
you can change the coffee strength of
espresso <, coffee >, cappuccino / and
latte macchiato ( by turning the Rotary
Switch.
E During preparation, you can change the
preset amounts (e.g. amount of milk foam
or water) by turning the Rotary Switch.
E You can follow the current status of
preparation on the progress bar.
Coffee tastes best served hot. A cold porcelain cup
cools the beverage – and impairs the taste. We
therefore recommend prewarming the cups. The
full coffee aroma can develop only in prewarmed
cups. You can purchase a JURA cup warmer from
your specialised dealer.
You can make permanent settings for all products
in programming mode (see Chapter 4 ‘Permanent
settings in programming mode – Products’).
Espresso, coffee
Preparation of espresso < and coffee > follows
this model.
Example:Proceed as follows to prepare one coffee.
Precondition:
READY is displayed.
T Place a cup under the dual spout.
> T Press the Coffee button to start preparation.
COFFEE, the preset amount of water flows
into the cup.
Preparation stops automatically.
READY
To Next Page
Loading...
Need help?
General
Weight and Dimensions
