Jura ENA Micro 1 - Daily Operation; Using Ground Coffee; Switching On the Machine; Daily Maintenance Procedures

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
ENA Micro line / IMPRESSA A line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontage_ENA_Micro_EN.docx
L:\Geräte\Linie_A\A5_OT\Schulungsunterlagen\E\Demontag
e_ENA_Micro_EN.docx
Date:
Rev. G:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
06.10.2011
20.02.2014
21.03.2012
19.09.2012
14.11.2012
27.03.2013
17.09.2013
Page 14/26
53. Press snap-lock and slide the Zero Energy Switch
(ZES)
54. Pull down the 2x snap-locks and slide down the
ZES to remove
55. Unscrew 2x TORX 15 and press snap-lock to
remove the thermoblock
56. Check the position of the grinder finesse
adjustment when re-inserting the grinder