To Next PageTo Next Page
Need help?Do you have a question about the Jura ENA Micro Series and is the answer not in the manual?
General| Bean Container Capacity | 4.4 oz |
|---|---|
| Pump Pressure | 15 bar |
| Power | 1450 W |
| Pulse Extraction Process (P.E.P.) | Yes |
| Series | ENA Micro |
| Voltage | 120 V |
| Color Options | Black, Silver |
| Milk Frother | No |
| Special Features | Intelligent Pre-Brew Aroma System |
| Water Tank Capacity | 36.8 oz |
Describes the removal of the service cover or side panel for first generation models.
Details side panel removal for second-generation and IMPRESSA A line machines.
Covers disassembly of additional components, including the brewing unit cover and brewing unit.
Provides instructions for removing the coffee spout specifically for the ENA Micro 5 model.
Details the process for removing the coffee spout for IMPRESSA A5 OT and A9 OT TFT models.
Block schematic diagram for ENA Micro 9 OT and IMPRESSA A5 OT models.
Block schematic diagram for the IMPRESSA A9 OT TFT model.
Block schematic diagram for ENA Micro 1 and ENA Micro 5 models.
Diagram of the fluid system for ENA Micro 9 OT and IMPRESSA A5 OT/A9 OT TFT.
Diagram of the fluid system for ENA Micro 1 and ENA Micro 5 models.
