Jura ENA Micro Series User Manual

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
ENA Micro line / IMPRESSA A line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontage_ENA_Micro_EN.docx
L:\Geräte\Linie_A\A5_OT\Schulungsunterlagen\E\Demontag
e_ENA_Micro_EN.docx
Date:
Rev. G:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
06.10.2011
20.02.2014
21.03.2012
19.09.2012
14.11.2012
27.03.2013
17.09.2013
Page 3/26
1 Disassembling (example ENA Micro 9 OT):
Important:
When exchanging components, it is very important to put back the cable wiring the same way
as it was before !
 Remove water tank, grounds container, aroma preservation lid, powder funnel
1. Turn JURA emblem anticlockwise
(e.g. with a suction disc).
Rather pulling than pushing when removing.
2. Unscrew the Oval screw
3. Release snap-lock of fixation of the lateral part
4. Unscrew 2x TORX 15

Jura ENA Micro Series Specifications

General

Bean Container Capacity	4.4 oz
Pump Pressure	15 bar
Power	1450 W
Pulse Extraction Process (P.E.P.)	Yes
Series	ENA Micro
Voltage	120 V
Color Options	Black, Silver
Milk Frother	No
Special Features	Intelligent Pre-Brew Aroma System
Water Tank Capacity	36.8 oz