To Next PageTo Next Page
Need help?Do you have a question about the Jura ENA Micro 1 Series and is the answer not in the manual?
General| Type | Automatic Coffee Machine |
|---|---|
| Model | ENA Micro 1 |
| Water Tank Capacity | 1.1 L |
| Bean Container Capacity | 125 g |
| Pump Pressure | 15 bar |
| Power | 1450 W |
| Voltage | 230 V |
| Weight | 8.8 kg |
| Height | 32 cm |
| Width | 23 cm |
| Depth | 44.5 cm |
| Programmable | Yes |
| Milk Frother | No |
| Display | No |
| Frequency | 50 Hz |
| Color | Black |
Procedure for accessing the service connector for models produced after June 2012.
Procedure for accessing the service connector for older models.
Steps to initialize the machine for first-time use.
Steps to restore the machine to its original factory configuration.
Details on the micro switch and UV protection for the lid.
How the powder funnel is monitored for overfilling.
Information on the water tank monitoring and capacity.
Details on the grounds container check via micro switch.
Information on the residual water container capacity.
Settings for coffee water volume.
How to adjust coffee flavour and aroma strength.
Details on the draw-off temperature settings.
Explanation of the Energy Safe Mode and its standby power.
Setting the automatic switch-off duration.
Note regarding service procedures using animation systems.
Detailed steps for factory reset without animation.
