Jura ENA Micro 1 Series - Troubleshooting Error Messages

Elektroapparate AG
Technical information
Technical Support
Language
EN
ENA Micro 1
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Technische_Informationen_ENA_Micro_1_EN.doc
L:\Geräte\ENA_Micro\ENA_Micro_1\Schulungsunterlagen\E\
Technische_Informationen_ENA_Micro_1_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
09.05.2012
19.09.2012
Page 10/10
21 Error messages:
 If there is a malfunction, an error message as described below is shown on the display:
 The appliance switches-OFF automatically 5 sec. after an ERROR
Display Message
Designation
ERROR 1
COFFEE: Temperature sensor notify “value below tolerance”
ERROR 2
COFFEE: Temperature sensor notify “value above tolerance”
ERROR 5
Heating up not possible
ERROR 8
“Positioning” / “Initialisation” of brewing unit not possible
ERROR 10
Heating was too hot (mains interferences received)