Jura ENA Micro 1 - Machine Descaling

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
ENA Micro line / IMPRESSA A line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontage_ENA_Micro_EN.docx
L:\Geräte\Linie_A\A5_OT\Schulungsunterlagen\E\Demontag
e_ENA_Micro_EN.docx
Date:
Rev. G:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
06.10.2011
20.02.2014
21.03.2012
19.09.2012
14.11.2012
27.03.2013
17.09.2013
Page 17/26
1.5 Coffee spout IMPRESSA A5 OT/A9 OT TFT:
67. Press coffee spout and release it downwards
68. Turn JURA emblem anticlockwise
(e.g. with a suction disc).
Rather pulling than pushing when removing.
69. Unscrew TORX 10 entfernen
Hold on side panel and slide middle part upwards
70. Detach side panels
71. View: Coffee spout
72. View: Cover of Hot water spout removed
Nut M3