Jura ENA Micro 1 - Transport and Disposal; System Emptying for Transport; Environmentally Friendly Disposal; Technical Specifications

22
8 Transport and environmentally friendly disposal
8 Transport and environmentally
friendly disposal
Transport/ Emptying the system
Keep the packaging for your ENA. It should be used
to protect the machine during transport.
In order to protect the ENA from frost during
transport, the system must be emptied.
Precondition:Your ENA is ready for use.
T Place a receptacle under the coffee spout.
T Touch the ; and _ symbols for approxi-
mately 2 seconds.
The ;, _, L and & or ! symbols light up
brightly.
T Remove and empty the water tank.
The <, > and M symbols light up.
< T Touch the Espresso symbol
Hot water will continue to flow until the
system is empty.
The Water Tank symbolM lights up.
Q T Press the On/Off button to switch the
machine off.
Disposal
Please dispose of old machines in an environmen-
tally neutral way.
H
9 Technical data
Voltage 120V~, 60Hz
Power 1450W
Conformity mark
Energy consumption
Energy Save Mode ‘on’
(display symbols slightly
less bright)
approx. 4.0 Wh
Pump pressure Static, max. 15bar
Holding capacity of water
tank (without filter)
37.2 oz
(1.1l)
Holding capacity of bean
container
4.4 oz
(125g)
Holding capacity of
coffee grounds container
approx. 9 servings
Cord length Approx. 43.3 in.
(1.1m)
Weight Approx. 19.6lb
(Approx. 8.9kg)
Dimensions (W×H×D) 9.0 × 12.7 × 17.5in.
(23 × 32.3 × 44.5cm)
Information for testers (repeat test in accordance
with DIN VDE 0701-0702): The central grounding
point (CGP) is located on the underside of the
machine, right next to the mains cable‘s connec-
tion point.
Directives
The machine complies with the following
directives:
U
Standard UL 1082
U
Canadian Standard CSA C22.2 No. 64