Jura IMPRESSA E50 User Manual

16
Display Cause Action
Cleaning necessary Run cleaning program
Decalcifying necessary Run decalcifying program
17. Problems
Problem Cause Action
Coffee flow is stopped after – Beans container is empty – Fill in beans
pre-brewing – Not enough coffee powder – Measure powder correctly
Grinder is extremely noisy – Alien element in grinder – Drawing off powder coffee is still possible
– Have the machine checked at a Jura service centre
Not enough froth – Unsuitable milk-type – Use full cream milk
– Frothing nozzle blocked – Clean frothing nozzle
– Frothing nozzle in wrong – Drawing off steam (see chapter 8)
If none of the remedies listed above help, please contact your dealer or get in touch with Jura Elektroapparate AG.

Jura IMPRESSA E50 Specifications

Power

voltage	230 V AC
power consumption	1350 W
fuse	10 A

Capacity

volume of water tank	1.9 litre

Weight and Dimensions

weight	8.3 kg
width	28 cm
height	34.5 cm
depth	41.5 cm