Jura IMPRESSA J9.3 - Remove Bean Container of the IMPRESSA XJ Line; Disassembling of Single Components

Elektroapparate AG
Disassembling manual
Technical Support
Language
EN
IMPRESSA J/XJ line
Author: Patrik Studer
Checked:
Approved:
Docu.-name: Demontageanleitung_J_Linie_EN.doc
L:\Geräte\Linie_J\J9\J9_4_OneTouch_TFT\Schulungs_Unterlag
en\E\Demontageanleitung_J_Linie_EN.doc
Date:
Rev. A:
Rev. B:
Rev. C:
Rev. D:
Rev. E:
Rev. F:
28.09.2006
27.08.2013
Page 3/18
1 Remove bean container of the IMPRESSA XJ line:
 Remove water tank
 Detach cover upwards and remove it
 Slide-in the beans lock
 Unscrew TORX 10 of the bean container
 Slide bean container to the left and lift and remove it upwards
2 Disassembling of single components:
1. View from the top:
Unscrew 4x Oval-screws
2. Unscrew only the left Oval-screw