Jura J6 User Manual

12
1 Preparing and using for the first time
T Press the ‘Save’ button.
‘Saved’ appears briefly on the display to confirm the setting.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Turn the Rotary Switch to change the water hardness
setting, e.g. to
‘25°dH’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
E Now decide whether you want to operate your J6 with or
without a CLEARYL Smart filter cartridge.
Operation with filter cartridge: go straight to the next section.
Operation without filter cartridge: see Chapter 1 ‘Preparing and
using for the first time – First-time use without filter cartridge
activation’.
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Place one receptacle under the hot-water spout and another
under the cappuccino frother.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge .
First-time use with filter
cartridge activation
NOTICE

Jura J6 Specifications

General

Product type	Espresso machine
Certification	TUV
Capacity in cups	16 cups
Hot water system	Yes
Number of spouts	2
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	2.1 L
Coffee beans capacity	250 g
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Color name	Piano White
Control type	Buttons, Rotary
Display type	TFT
Product color	White
Drip/spout adjustment	Horizontal + Vertical
Americano making	No
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0 W
Cable length	1.1 m
Pump pressure	15 bar
Country of production	Switzerland

Weight and Dimensions

Depth	433 mm
Width	285 mm
Height	342 mm
Weight	10900 g