Jura J600 - Connecting Milk

14
1 Preparing and using for the first time
Your JURA creates fine, creamy, feather-light milk foam with a per-
fect consistency. The most important requirement for frothing milk
is a milk temperature of 4–8°C. We would therefore recommend
using a milk cooler or a milk container.
E Suitable milk containers from JURA are available from special-
ised dealers.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.
You have the option of connecting your JURA wirelessly to a
compatible accessory (e.g. the Cool Control Wireless milk cooler). To
do this, the receiver of the Cool Control or the JURA Smart Connect
must be plugged into the service socket.
T Press the P button.
‘Maintenance status’
T Turn the Rotary Switch until ‘Machine settings’ is displayed.
T Press the Rotary Switch.
‘Choose language’
T Turn the Rotary Switch until ‘Connect accessory’ is dis-
played.
T Press the Rotary Switch to enter the programme item.
‘Connect accessory’
T Press the ‘Next’ button.
T Now follow the instructions on the display to connect the
accessory to the JURA.
Connecting milk
Connect accessory
(wireless connection)