User Manual MDB- Interface
6.2 “MDB-Interface“ buttons
“Read“ button – import billing data
To adapt the existing software settings of your MDB-Interface to your personal requirements, you
have to import it first of all to your computer. You can do this, by pressing the “read“ button.
Note: This process may last a couple of seconds..
“Write“ button – export billing data
To make your adaptations effective, you have to press the “Write“ button, so the data can be written
to the MDB-Interface.
Note: This process may last a couple of seconds..
6.3 “Billing Mode“ buttons
“Switch On“ button
Press this button to activate the billing mode of your coffee machine. Free draw-offs won’t be possi-
ble any more.
“Switch Off“ button
Press this button to set your coffee machine back to the normal mode (free draw-offs). If you remove
the RS 232 cable (fig. 1/d) from the coffee machine before you have pressed this button, the machine
remains locked and no draw-off is possible.
Note:
If the credit remains in the display even though you have switched the billing mode off, the coffee
machine has to be disconnected from the mains supply for a short time.
6.4 Scroll down menu “Machine Type“
Use this scroll down menu to select your machine type, if the automatic recognition did not work
right or did not work at all.
6.5 Checkbox “Currency Requires Decimal Place“
Select this checkbox, if your currency requires two decimal places.
6.6 “Product“ boxes
Use this boxes to define a certain price for each product. Please note, that the decimal place has to
be a “.” and not a “,”. To learn which box belongs to which product, please consult the picture on the
right side. Use the check box right beside the text box, if you want to lock certain products for the
billing mode.
Note I:
If the picture on the right side does not belong to your machine type, please change the setting in
the scroll down menu “machine type“.
Note II:
It is possible, that you cannot enter a decimal place with the numeric keys of your computer key-
board. In this case, please use the “.”-character of the main keyboard.
6.7 “Coin Checker“ boxes
If you use a coin checker, you have the possibility to allocate a certain value for each coin. Please
note, that the decimal place has to be a “.” and not a “,”.
Note:
It is possible, that you cannot enter a decimal place with the numeric keys of your computer key-
board. In this case, please use the “.”-character of the main keyboard.
To Next Page
Loading...
Need help?
General