To Next PageTo Next PageWhy is the phone sound quality poor on my JVC KENWOOD KW-X850BT?
To resolve issues with poor phone sound quality on your JVC KENWOOD Receiver, try these steps: 1. Reduce the distance between the unit and the Bluetooth device. 2. Move the car to a location with better signal reception.
Why is sound interrupted during Bluetooth playback on my JVC KENWOOD KW-X850BT?
If you are experiencing interrupted or skipped audio during Bluetooth playback on your JVC KENWOOD Receiver: * Reduce the distance between the unit and the Bluetooth audio player. * Try turning the unit off and on again, then reconnect. * Be aware of other Bluetooth devices that might be trying to connect to the unit.
Why does my JVC KENWOOD KW-X850BT keep flashing “READING”?
If your JVC KENWOOD Receiver displays “READING” continuously, avoid using too many hierarchical levels and folders on your USB device. If the problem continues, try reattaching the USB, iPod, or iPhone.
How to fix “iPod ERROR” on my JVC KENWOOD Receiver?
If your JVC KENWOOD Receiver displays “iPod ERROR”, try reconnecting the iPod. If the error persists, reset the iPod. As another solution, you can turn the power off and on again for error recovery by pressing and holding SOURCE B.
Why does my JVC KENWOOD KW-X850BT keep “LOADING” in search mode?
If your JVC KENWOOD Receiver displays “LOADING” when you enter search mode, the unit is still preparing the iPod/iPhone music list. It may take some time to load, so try again later.
Why won't my JVC KENWOOD Receiver switch to USB source?
If the source does not change to “USB” when you connect a USB device while listening to another source on your JVC KENWOOD Receiver, it may be because the USB port is drawing more power than the design limit. Try turning the power off, unplugging the USB device, and then turning the power back on and reattaching the USB device. If the issue persists, turn the power off and on (or reset the unit) before trying another USB device.
How to fix “USB ERROR” on my JVC KENWOOD KW-X850BT?
If your JVC KENWOOD Receiver displays “USB ERROR”, verify the connection between the unit and your iPod/iPhone. If the error continues, disconnect and reset the iPod/iPhone using a hard reset.
How to improve radio reception on my JVC KENWOOD KW-X850BT?
If you experience poor radio reception with your JVC KENWOOD Receiver, ensure the antenna is firmly connected.
What to do if my JVC KENWOOD KW-X850BT does not work at all?
If your JVC KENWOOD Receiver is not working, try resetting the unit.
Why are correct characters not displayed on my JVC KENWOOD Receiver?
If your JVC KENWOOD Receiver displays incorrect characters, note that the unit can only display uppercase letters, numbers, and a limited number of symbols. Also, depending on the selected display language, some characters may not be displayed correctly.
General| DIN Size | Double DIN |
|---|---|
| RMS Power Output | 22 Watts |
| Peak Power Output | 50 Watts |
| RMS Power Output Per Channel | 22 Watts |
| Peak Power Output Per Channel | 50 Watts |
| Preamp Outputs | 3 pairs |
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Input | Yes |
| AUX Input | Yes |
| Radio Tuner | AM/FM |
| Pandora Control | Yes |
| iHeartRadio Control | Yes |
| Spotify Control | Yes |
| Rear View Camera Input | Yes |
| Steering Wheel Control Compatible | Yes |
| Equalizer | 13-Band |
| Crossover | Yes |
| Time Alignment | Yes |
| Video Playback | Yes |
| Remote Control | Yes |
| Apple CarPlay | No |
| Android Auto | No |
| Display Type | LCD |
| SiriusXM Ready | Yes |
| File Playback | MP3, WMA, AAC |
| Preamp Voltage | 2.5V |
Overview of the physical front panel and its controls.
Procedure for resetting the device to its default settings.
Information on using the optional remote control for operation.
Initial setup step for confirming crossover type and disabling demo mode.
Guide to setting the current time and date on the device.
Instructions on how to find radio stations using auto or manual tuning.
How to store and select preset radio stations.
Accessing additional radio tuning and playback options.
Steps for connecting a USB storage device for playback.
Guide on connecting Apple devices via USB for audio playback.
Controls for navigating and playing audio files from USB/iPod.
Steps before connecting an auxiliary audio source.
How to connect and play audio from an auxiliary input.
Instructions to install the JVC Remote app on your smartphone.
Steps to launch and connect the app to the car receiver.
Configuration options within the receiver for the app.
Overview of supported Bluetooth profiles and codecs.
Instructions on how to connect and position the external microphone.
Detailed steps for pairing a new Bluetooth device.
How automatic pairing works with supported devices.
How to handle incoming calls and manage calls during a conversation.
On-faceplate and remote control operations for calls.
Settings to enhance call clarity and reduce noise.
Configuration for auto-answer and ring color.
How to initiate calls via history, phonebook, or voice.
Using the phonebook for dialing and managing contacts.
Manually entering phone numbers for calls.
Using voice commands for phone functions.
Steps to initiate calls via the phone's voice recognition.
Saving frequently used numbers to preset buttons.
Managing Bluetooth connections, selecting devices, and deleting paired devices.
Changing the Bluetooth PIN code for pairing.
Enabling automatic reconnection with previously paired devices.
Configuring automatic pairing via USB connection.
Resetting all Bluetooth settings to factory defaults.
Verifying Bluetooth device compatibility with the unit.
How to play audio wirelessly from a Bluetooth device.
Steps to select BT Audio source and start playback.
Navigating tracks using the unit's controls.
Setting track or folder repeat modes.
Enabling shuffled playback for tracks or folders.
How to browse and select audio files.
Managing multiple Bluetooth audio sources.
Playing music from iPod/iPhone using Bluetooth.
Applying predefined EQ settings for different music genres.
Customizing and saving EQ settings to the USER profile.
Accessing additional audio configurations like EQ, Bass Boost, etc.
Options for selecting preset EQs or custom user settings.
Adjusting sound settings for a custom EQ profile.
Source-specific custom EQ adjustments.
Enabling or disabling the subwoofer output.
Adjusting the balance between front and rear speakers.
Adjusting the balance between left and right speakers.
Setting the initial volume level for each source.
Setting amplifier gain for low or high power speakers.
Speaker output settings based on connection method.
Selecting speaker size for optimal crossover performance.
Setting the crossover type (2-way or 3-way).
Enhancing sound space, response, and lift.
Configuring speaker output via lineout or speaker leads.
How to connect via external amplifier lineout terminals.
Connecting speakers directly without an external amplifier.
Adjusting crossover frequencies and slopes for speakers.
Selecting speaker sizes for optimal performance.
Detailed crossover frequency, slope, phase, and gain settings.
Specific settings for 2-way crossover configurations.
Size options for front, rear, and subwoofer speakers.
Tweeter and crossover frequency/slope settings.
Specific settings for 3-way crossover configurations.
HPF/LPF frequency and slope settings for mid-range speakers.
LPF frequency, slope, phase, and gain for subwoofer.
Adjusting speaker delay and gain based on listening position.
Adjusting speaker delay and gain based on listening position.
Selecting the listening position for delay compensation.
Fine-tuning speaker distance for compensation.
Adjusting speaker output volume for compensation.
Resetting delay and gain settings to default.
Identifying car type and rear speaker location for DTA adjustment.
How the unit calculates speaker delay times automatically.
Adjusting display brightness, color, and information display.
Visual guide to identifying zones for brightness adjustments.
Visual guide to identifying zones for color adjustments.
Adjusting screen brightness and dimmer settings.
Controls for dimming the display illumination.
Setting automatic on/off times for the dimmer.
Automatic dimmer activation based on headlights.
Adjusting brightness levels for day and night.
Configuring text scrolling behavior on the display.
Displaying battery status, signal strength, or date.
Customizing button illumination colors for different zones.
Selecting preset or custom illumination colors.
Storing custom day illumination colors.
Storing custom night illumination colors.
Instructions for cleaning the unit's faceplate.
Where to find firmware updates and application details.
List of supported audio file formats and systems.
Limitations and requirements for USB devices.
Compatibility notes for Apple devices and OS versions.
How display information changes when pressing MENU.
Table showing display info for different sources.
Solutions for common operational problems and error messages.
Troubleshooting common issues like no sound or error messages.
Solutions for radio reception problems and static.
Troubleshooting playback and file recognition issues.
Further troubleshooting for USB/iPod connection and playback errors.
Solutions for Bluetooth pairing, echo, and sound quality issues.
Troubleshooting Bluetooth audio player control and connection stability.
Guidance on installing the unit and connecting wiring harnesses.
Critical safety warnings for unit installation and wiring.
Precautions regarding unit installation, speaker connection, and mounting angle.
List of components included for installing the unit.
Step-by-step guide for installing the head unit in the car.
Specific instructions for mounting the unit into the dashboard.
Special mounting instructions for Toyota vehicles.
Detailed diagram and instructions for connecting the unit's wiring harness.
Recommendation for professional installation and safety advice.
How to connect external amplifiers using the unit's output terminals.
Table showing output terminal configurations for 2-way and 3-way crossovers.
Technical specifications for the FM and AM/SW radio tuner.
Technical specifications related to USB connectivity and playback.
Detailed specifications for USB file decoding and playback.
Technical specifications for the auxiliary audio input.
Technical details of the Bluetooth module, including version and profiles.
Specifications for audio output power and speaker impedance.
Frequency bands and levels for audio equalization.
High-pass filter settings for speaker output.
Low-pass filter settings for speaker output.
General specifications like operating voltage and dimensions.
