JVC AX-V4BK - Page 11

LL-b
COMPU LINK Remote Control System
The COMPU LINK remote control system allows you to operate JVC audio components through the remote
sensor on the AX-V4BK.
COMPU Law To use this remote control system, you need to connect JVC audio components through the COMPU LINK-
Hill Remote jill 3 SYNCHRO jacks (see page 8) in addition to the connections using cables with RCA pin plugs (see page 7).
Control This remote control system allows you to use four functions listed below.
m@__ Remote Control through the Remote Sensor on the AX-V4BK
You can contro} all audio components through the remote sensor on the AX-V4BK using this remote control.
For details, see page 18.
Note:
Aim the remote control directly at the remote sensor on the AX-V4BK,
@_ Automatic Source Selection
When you press the play button on a connected component or on its own remote control, the AX-V4BK
automatically turns on and changes the source to the component. On the other hand, if you select a new source
on the AX-V4BK or the remote control, the selected component begins playing immediately.
In both cases, the previously selected source continues playing without sound for a few seconds.
@ Automatic Power On/Off (only possible with the COMPU LINK-3 connection)
The audio components (tuner, CD player and cassette deck) connected to the AX-V4BK automatically turn
on and off with the AX-V4BK.
When you turn on the AX-V4BK, one of the connected components will tum on automatically, depending
which component has been previously selected.
When you tum off the AX-V4BK, these components connected will turn off.
m@__ Synchronized Recording
Synchronized recording means the cassette deck starts recording as soon as a CD or record begins playing.
To use synchronized recording, follow these steps:
1 Puta tape in the cassette deck, and a disc in the CD player (or a record on the turntable).
2 Press the record (@) button and the pause (#8) button on the cassette deck at the same time.
This puts the cassette deck into recording pause.
Note:
If youdo not press the record (@) button and pause {\1) button at the same time, the synchronized recording
feature will not operate.
3 Press the play (>) button on the CD player or on the turntable.
‘The source changes on the AX-V4BK, and as soon as play starts, the cassette deck starts recording.
When the play ends, the cassette deck enters recording pause, and stops 4 seconds later.
Notes:
* During synchronized recording, the selected source cannot be changed.
* Ifyour CD player is playing in program mode, a4-second blank is recorded between tracks so that the music
scan feature of your cassette deck can be used on the recorded tape.
+ Ifthe power of any component is shut off during synchronized recording, the COMPU LINK remote control
system may not operate properly. In this case, you must start again from the beginning.
* Refer also to the manuals supplied with your CD player and cassette deck.
Page 17
Using the Remote Control
a Oe
You can operate JVC's audio and video components with this AX-V4BK's remote control, since contro! signals for JVC components are preset
in the remote control.
To operate these components with the remote control, first select a source with the source selecting buttons on the remote control. Then, operate
that source using the remote control.
Note:
If you choose a source on the front panel directly, the remote control will not operate that source. To operate a source with the remote control,
the source must be selected using buttons on the remote control.
'MPORTANT:
To operate JVC's audio components using this remote control:
* You need to connect JVC audio components through the COMPU LINK-3 SYNCHRO jacks (see page 8) in addition to the
connections using cables with ACA pin plugs (see page 7).
* Aim the remote control directly at the remote sensor on the AX-V4BK.
To operate JVC's video components using this remote control:
* Aim the remote control directly at the remote sensor on the VCR or TV, not on the AX-V4BK.
After pressing the TUNER button, you can perform the following operations on a tuner:
1— 10, +10 Selects a preset channel number directly
To select channel number 5, press 5. For channel number 15, press +10, then 5, For
channel number 20, press +10, then 10.
RDS (Radio Data System) operating buttons:
PTY SEARCH Starts PTY (programme type) Search.
PTY SELECT +/- Select programme type you want.
DISPLAY MODE Changes the RDS information shown on the display.
JVC PULSAVA REMOTE COWTROL
After pressing the CD button, you can perform the following operations on a CD player:
> Starts playing
we Returns to the beginning of the current (or previous) track
mri Skips to the beginning of the next track
a Stops playing
" Pauses
1— 10, +10 Selects a track number directly
To select track number 5, press 5. For track number 15, press +10, then 5, For track
number 20, press +10, then 10.
After pressing the CD-DISC button, you can perform the following operations on a CD player-changer:
1~ 6, 7/P Select the number of a disc installed in a CD player-changer. Then continue to
operate the CD player as described above.
Note:
If you have the CD player-changer XL-MC100C and XL-MC100M, 1 — 6 buttons function as the DISC
SKIP button.
* Press 2, 4, or 6 to skip to the next disc.
* Press 1, 3, or 5 to skip back to the previous disc.
After pressing the TAPE button, you can perform the following operations on a cassetle deck:
> Starts playback
—< Fast winds a tape from right to left
Pr Fast winds a tape from left to right
= Stops operation
u Pauses
Afler pressing the VCR button, you can perform the following operations on a VCR:
> Starts playback
i Rewinds a video tape
mr Fast winds a video tape
a Stops operation
n Pauses
TV/VCR CH+4/— Changes TV channels on a VCR
Note:
While you are playing the source other than VCR—such as the CD player or cassette deck, you cannot
operate the VCR using the remote control.
After pressing the TV button (located at the upper leftmost portion of the remote control, not the one in the
POWER section}, you can perform the following operations on TV:
TV/VCR CH+/~- Changes TV channels
Notes:
+ When you press the TV button (located at the upper leftmost portion of the remote control, not the one
in the POWER section), the TV's input mode changes to TV.
* You can also turn the VCR or TV on and off by pressing the VCR or TV button in the POWER section
of the remote control.
Page 18
MEvA-XV