JVC CA-D5T User Manual

Repeating a Selection Or the Discs
Q Press the REPEAT button before or during random play to instruct the CA-DST to continue with
a different random track selection after the last selection is played.
To cancel random play, press the PROGRAM/RANDOM button (or the PLAY MODE button on the
Remote Control) and select another mode.
=
a
=
=
uw
You can have all the discs, the program or the individual selection currently playing repeat as many
times as you like.
Press the REPEAT button on the CA-D5T.
The display changes with each press of the button, as shown below.
— REPEAT ALL -> REPEAT 1 CD - REPEAT 1 > Off (Continuous Play) > (back to the beginning)
REPEAT ALL: Repeats all the tracks on the CD’s in the CD Player, or all the tracks in the
program.
REPEAT 1 CD: Repeats all the tracks on one CD.
REPEAT 1: Repeats one track on a CD.
(The three Repeat Modes above can be selected during Continuous Play, however, during
Program Play and Random Play, you can only select REPEAT ALL or REPEAT 1.
To exit Repeat Mode, press the REPEAT button until the “REPEAT” indicator on the display goes
out.
Tray Lock Function
In order to safely keep the discs in the CD Player, the three trays can be electronically locked in a
single operation.
‘When the electronic lock is on, the trays cannot be opened even if the & button is pressed.
Locking the Electronic Lock
7. Put the CA-D5T's power into the STANDBY condition.
If the power is on, press the POWER button to light the Standby indicator.
2. While pressing the STOP/CANCEL m button, press the & button for DISC 1's tray on the Unit.
“LOCKED” appears in the display to notify that the trays have been locked.
1 Fir ket? Tt
LuULne a
When the CD Player trays are locked, pressing the 4 buttons displays the message “LOCKED”
on the display and the trays do not open. Also, the & button cannot be used to automatically turn
on the power.
Unlocking the Electronic Lock
7. Put the CA-D5T's power into the STANDBY condition.
If the power is on, press the POWER button to light the Standby indicator.
2.
While
pressing
the
STOP/CANCEL
m
button,
press
the
&
button
for
DISC
1's
tray
on
the
Unit.
When
the
unlock
operation
is
done,
“UNLOCKED”
appears
in
the
display
to
show
that
the
lock
has
been
taken
off.
Pipt? TIF be oT
LN Ga Ie
The trays can now be opened by pressing the & buttons.
The & button can also be used to automatically turn on the power.
19

JVC CA-D5T Specifications

General

Brand	JVC
Model	CA-D5T
Category	Stereo System
Language	English