JVC CA-D5T User Manual

Music Scan
To find the beginning of a music track during play, use the Music Scan function. Music Scan
searches for blank portions that usually separate tracks, then plays the next song.
English
To Find the Beginning of the Current Song
Press the TAPE << or >> button (or the << or >> button on the Remote Contro!) during play.
Q Make sure that you press the TAPE @<d or 4 button (or the <4 or > button on the Remote
Control) in the opposite direction to that in which the tape is playing. Searching stops at the
beginning of the current song, and the current song starts automatically.
To Find the Beginning of the Next Song
Press the TAPE I<¢<4 or >> button (or the << or >> button on the Remote Control) during play.
() Make sure that you press the TAPE <d or 1 button (or the << or > button on the Remote
Control) in the same direction as that in which the tape is playing. Searching stops at the
beginning of the next song, and the next song starts automatically.
Music Scan works by detecting a 4-second long blank at the beginning of each selection, so it
won't work well if your tape has:
¢ No blank at the beginning of a track
* Noise (often caused by much use or poor quality dubbing) which fills the blank with noise.
« Long, very soft passages or pauses in a selection. The scan will detect these as 4-second
long blanks. If this happens, just scan again until you reach the selection you want.
Other Useful Features of the Cassette Deck
nevense Q Use Reverse Mode to make the tape automatically reverse at the end of a side and start playing
the other side. Press the REVERSE MODE button to change from Reverse Mode on to Reverse
Mode off, or from off to on.
(=) 2
Reverse Mode ON Reverse Mode OFF
Q Continuous Play: With the Reverse Mode indicator on, when tape playback in the <4 direction
finishes, the Unit always checks to see if a tape is in the other deck. If there is, it automatically
oom 8 starts playing. This Continuous Play function works regardless of which deck starts first.
QO Press the DOLBY B NR button to switch Dolby B Noise Reduction on (the indicator lights up)
or off (the indicator goes off). If a tape is recorded with the Dolby B NR system, playing it back
with the Dolby NR on will reduce tape noise and improve the clarity of the sound.
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY” and the double-D symbol are trademarks of Dolby Laboratories Licensing
Corporation.
22

JVC CA-D5T Specifications

General

Brand	JVC
Model	CA-D5T
Category	Stereo System
Language	English